Are you looking to buy a Dock?

We have docks for sale! At Richardson Docks we design and build floating pontoon docks for Ontario’s lakes and rivers. A pontoon dock has continuious floatation down each side. This gives the unit more weight capacity. On our docks we put two pontoon floats on 6 foot wide docks and 3 floats on 8 foot wide docks. A 10 foot wide dock would have 4 floats.

Docks For sale in Ontario

Normally the decking material on our docks is pressure treated lumber or cedar. We also can use composite materials if that is what the customer wants.

We have a process we like to follow when talking to potential customers. Most people are focused on the actual docks themselves however it is very important for us to understand how they are going to be attached to shore and what the environment around them will be. (water depth, water levels, shoreline conditions etc.)

Please go to our Dock Design Page for more information on our process.

Docks For Sale We Deliver and Install

One of the big challenges people have is actually getting new docks to their location. Our pontoon docks are designed to be used with barges. We simply put an outboard motor on the end and drive it to their location. We can stack another dock or ramp on top quite easily.

Anchoring

When we price out our docks for sale we always include anchoring. Anchors come in various weights depending on the amount of wind and wave exposure they will face.

Peripherals Docks For Sale

Normally when we price out our docks for sale we also include peripherals such as bumpers, dock cleats, solar lights and swim ladder.

Hitch Hinges

All of our docks connect to each other using the “hitch Hinge” technology. They are quiet, strong and best of all pinless. They are easy to connect and disconnect for winter storage.

For more information on Hitch Hinges visit www.hitchinge.ca

Winger Storage

Our docks are designed to be left in the water for the winter. Please visit our winter storage page.

Visit our Home Page for more Photos, Information and offers.

Don’t forget to visit our Facebook page

Do it Yourself Dock Kit (DIY Kits)

At Richardson Docks we offer an exclusive Do it Yourself dock kit. The Kit includes the correct number of floats for the size you want to build with all the attaching nuts and bolts to complete the project. Don’t forget to watch the video and read the steps required to complete your dock or raft. We can also supply all the other peripherals you may need depending on the scope of the job.

If you would like some hints and tips on how to build your Dock or Raft always feel free to call us.

The Do it Yourself Dock Kit Includes

• Pontoon Floats (2 floats for 6ft wide, 3 floats for 8ft wide, 4 floats for 10ft wide
• Corner Brackets & Back Plates ( four 8″ x 8″ x 5″ x1/4″ steel corner brackets and eight 5″ x 5″ x 1/4″ back plates
• 1/2″ x 3″ Galvanized Carriage Bolts, Nuts and Lock Washers
• Anchor Chain Brackets (Two)
• Dock Cleats ( Four)

Optional Peripherals

The optional peripherals include

• Swim Ladder ( Three or Four Step Angled Ladder)
• Solar Lights. (A flat Deck light)
• Side Bumpers ( Reinforced P Style)
• Corner Bumpers
• Deck Screws (We use a structural 3 1/16 number 9 screw with a Torx Head)
• Hinge Set We Recommend “Hitch Hinge” See the link below.

What is not included in our Do it Yourself Dock Kit

What we do not provide in the Do it Yourself Dock Kit.

• Dock Decking Materials
• Framing Materials.

6ft x 12ft ( 2 Pontoon Floats)	$1,610
6ft x 16ft ( 2 Pontoon Floats)	$2,065
6ft x 20ft ( 2 Pontoon Floats)	$2,520
6ft x 22ft ( 2 Pontoon Floats)	$2,746
8ft x 12ft (3 Pontoon Floats)	$2.294
8ft x 16ft (3 Pontoon Floats)	$2,976
8ft x 20ft (3 Pontoon Floats)	$3.657
8ft x 22ft (3 Pontoon Floats)	$3,985
10ft x 12ft (4 Pontoon Floats)	$2,977
10ft x 16ft (4 Pontoon Floats)	$3,887
10ft x 20ft (4 Pontoon Floats)	$4,797
10ft x 22ft (4 Pontoon Floats)	$5,252

How To Build A Dock | Hitch Hinge

Don’t forget to visit our Facebook page